diff --git a/board/amcc/bamboo/bamboo.h b/board/amcc/bamboo/bamboo.h
index 612e9af..5f5fcde 100644
--- a/board/amcc/bamboo/bamboo.h
+++ b/board/amcc/bamboo/bamboo.h
@@ -12,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -29,107 +29,107 @@
  * TLB initialization makes it correspond to logical address 0x80001FF0.
  * => Done init_chip.s in bootlib
  */
-#define FPGA_BASE_ADDR  0x80002000
+#define FPGA_BASE_ADDR	0x80002000
 
 /*----------------------------------------------------------------------------+
   | Board Jumpers Setting Register
   |   Board Settings provided by jumpers
   +----------------------------------------------------------------------------*/
-#define FPGA_SETTING_REG            (FPGA_BASE_ADDR+0x3)
+#define FPGA_SETTING_REG	    (FPGA_BASE_ADDR+0x3)
 /* Boot from small flash */
-#define     FPGA_SET_REG_BOOT_SMALL_FLASH           0x80
+#define	    FPGA_SET_REG_BOOT_SMALL_FLASH	    0x80
 /* Operational Flash versus SRAM position in Memory Map */
-#define     FPGA_SET_REG_OP_CODE_SRAM_SEL_MASK      0x40
-#define      FPGA_SET_REG_OP_CODE_FLASH_ABOVE        0x40
-#define      FPGA_SET_REG_SRAM_ABOVE                 0x00
+#define	    FPGA_SET_REG_OP_CODE_SRAM_SEL_MASK	    0x40
+#define	     FPGA_SET_REG_OP_CODE_FLASH_ABOVE	     0x40
+#define	     FPGA_SET_REG_SRAM_ABOVE		     0x00
 /* Boot From NAND Flash */
-#define     FPGA_SET_REG_BOOT_NAND_FLASH_MASK       0x40
-#define     FPGA_SET_REG_BOOT_NAND_FLASH_SELECT      0x00
+#define	    FPGA_SET_REG_BOOT_NAND_FLASH_MASK	    0x40
+#define	    FPGA_SET_REG_BOOT_NAND_FLASH_SELECT	     0x00
 /* On Board PCI Arbiter Select */
-#define     FPGA_SET_REG_PCI_EXT_ARBITER_SEL_MASK   0x10
-#define     FPGA_SET_REG_PCI_EXT_ARBITER_SEL        0x00
+#define	    FPGA_SET_REG_PCI_EXT_ARBITER_SEL_MASK   0x10
+#define	    FPGA_SET_REG_PCI_EXT_ARBITER_SEL	    0x00
 
 /*----------------------------------------------------------------------------+
   | Functions Selection Register 1
   +----------------------------------------------------------------------------*/
-#define FPGA_SELECTION_1_REG        (FPGA_BASE_ADDR+0x4)
-#define     FPGA_SEL_1_REG_PHY_MASK         0xE0
-#define     FPGA_SEL_1_REG_MII              0x80
-#define     FPGA_SEL_1_REG_RMII             0x40
-#define     FPGA_SEL_1_REG_SMII             0x20
-#define     FPGA_SEL_1_REG_USB2_DEV_SEL     0x10           /* USB2 Device Selection */
-#define     FPGA_SEL_1_REG_USB2_HOST_SEL    0x08           /* USB2 Host Selection */
-#define     FPGA_SEL_1_REG_NF_SELEC_MASK    0x07           /* NF Selection Mask */
-#define     FPGA_SEL_1_REG_NF0_SEL_BY_NFCS1 0x04           /* NF0 Selected by NF_CS1 */
-#define     FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2 0x02           /* NF1 Selected by NF_CS2 */
-#define     FPGA_SEL_1_REG_NF1_SEL_BY_NFCS3 0x01           /* NF1 Selected by NF_CS3 */
+#define FPGA_SELECTION_1_REG	    (FPGA_BASE_ADDR+0x4)
+#define	    FPGA_SEL_1_REG_PHY_MASK	    0xE0
+#define	    FPGA_SEL_1_REG_MII		    0x80
+#define	    FPGA_SEL_1_REG_RMII		    0x40
+#define	    FPGA_SEL_1_REG_SMII		    0x20
+#define	    FPGA_SEL_1_REG_USB2_DEV_SEL	    0x10	   /* USB2 Device Selection */
+#define	    FPGA_SEL_1_REG_USB2_HOST_SEL    0x08	   /* USB2 Host Selection */
+#define	    FPGA_SEL_1_REG_NF_SELEC_MASK    0x07	   /* NF Selection Mask */
+#define	    FPGA_SEL_1_REG_NF0_SEL_BY_NFCS1 0x04	   /* NF0 Selected by NF_CS1 */
+#define	    FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2 0x02	   /* NF1 Selected by NF_CS2 */
+#define	    FPGA_SEL_1_REG_NF1_SEL_BY_NFCS3 0x01	   /* NF1 Selected by NF_CS3 */
 
 /*----------------------------------------------------------------------------+
   | Functions Selection Register 2
   +----------------------------------------------------------------------------*/
-#define FPGA_SELECTION_2_REG        (FPGA_BASE_ADDR+0x5)
-#define     FPGA_SEL2_REG_IIC1_SCP_SEL_MASK 0x80           /* IIC1 / SCP Selection */
-#define     FPGA_SEL2_REG_SEL_FRAM          0x80           /* FRAM on IIC1 bus selected - SCP Select */
-#define     FPGA_SEL2_REG_SEL_SCP           0x80           /* Identical to SCP Selection */
-#define     FPGA_SEL2_REG_SEL_IIC1          0x00           /* IIC1 Selection - Default Value */
-#define     FPGA_SEL2_REG_SEL_DMA_A_B       0x40           /* DMA A & B channels selected */
-#define     FPGA_SEL2_REG_SEL_DMA_C_D       0x20           /* DMA C & D channels selected */
-#define     FPGA_SEL2_REG_DMA_EOT_TC_3_SEL  0x10           /* 0 = EOT - input to 440EP */
-                                                           /* 1 = TC - output from 440EP */
-#define     FPGA_SEL2_REG_DMA_EOT_TC_2_SEL  0x08           /* 0 = EOT (input to 440EP) */
-                                                           /* 1 = TC (output from 440EP) */
-#define     FPGA_SEL2_REG_SEL_GPIO_1        0x04           /* EBC_GPIO & USB2_GPIO selected */
-#define     FPGA_SEL2_REG_SEL_GPIO_2        0x02           /* Ether._GPIO & UART_GPIO selected */
-#define     FPGA_SEL2_REG_SEL_GPIO_3        0x01           /* DMA_GPIO & Trace_GPIO selected */
+#define FPGA_SELECTION_2_REG	    (FPGA_BASE_ADDR+0x5)
+#define	    FPGA_SEL2_REG_IIC1_SCP_SEL_MASK 0x80	   /* IIC1 / SCP Selection */
+#define	    FPGA_SEL2_REG_SEL_FRAM	    0x80	   /* FRAM on IIC1 bus selected - SCP Select */
+#define	    FPGA_SEL2_REG_SEL_SCP	    0x80	   /* Identical to SCP Selection */
+#define	    FPGA_SEL2_REG_SEL_IIC1	    0x00	   /* IIC1 Selection - Default Value */
+#define	    FPGA_SEL2_REG_SEL_DMA_A_B	    0x40	   /* DMA A & B channels selected */
+#define	    FPGA_SEL2_REG_SEL_DMA_C_D	    0x20	   /* DMA C & D channels selected */
+#define	    FPGA_SEL2_REG_DMA_EOT_TC_3_SEL  0x10	   /* 0 = EOT - input to 440EP */
+							   /* 1 = TC - output from 440EP */
+#define	    FPGA_SEL2_REG_DMA_EOT_TC_2_SEL  0x08	   /* 0 = EOT (input to 440EP) */
+							   /* 1 = TC (output from 440EP) */
+#define	    FPGA_SEL2_REG_SEL_GPIO_1	    0x04	   /* EBC_GPIO & USB2_GPIO selected */
+#define	    FPGA_SEL2_REG_SEL_GPIO_2	    0x02	   /* Ether._GPIO & UART_GPIO selected */
+#define	    FPGA_SEL2_REG_SEL_GPIO_3	    0x01	   /* DMA_GPIO & Trace_GPIO selected */
 
 /*----------------------------------------------------------------------------+
   | Functions Selection Register 3
   +----------------------------------------------------------------------------*/
-#define FPGA_SELECTION_3_REG        (FPGA_BASE_ADDR+0x6)
-#define     FPGA_SEL3_REG_EXP_SLOT_EN               0x80    /* Expansion Slot enabled */
-#define     FPGA_SEL3_REG_SEL_UART_CONFIG_MASK      0x70
-#define     FPGA_SEL3_REG_SEL_UART_CONFIG1          0x40    /* one 8_pin UART */
-#define     FPGA_SEL3_REG_SEL_UART_CONFIG2          0x20    /* two 4_pin UARTs */
-#define     FPGA_SEL3_REG_SEL_UART_CONFIG3          0x10    /* one 4_pin & two 2_pin UARTs */
-#define     FPGA_SEL3_REG_SEL_UART_CONFIG4          0x08    /* four 2_pin UARTs */
-#define     FPGA_SEL3_REG_DTR_DSR_MODE_4_PIN_UART   0x00    /* DTR/DSR mode for 4_pin_UART */
-#define     FPGA_SEL3_REG_RTS_CTS_MODE_4_PIN_UART   0x04    /* RTS/CTS mode for 4_pin_UART */
+#define FPGA_SELECTION_3_REG	    (FPGA_BASE_ADDR+0x6)
+#define	    FPGA_SEL3_REG_EXP_SLOT_EN		    0x80    /* Expansion Slot enabled */
+#define	    FPGA_SEL3_REG_SEL_UART_CONFIG_MASK	    0x70
+#define	    FPGA_SEL3_REG_SEL_UART_CONFIG1	    0x40    /* one 8_pin UART */
+#define	    FPGA_SEL3_REG_SEL_UART_CONFIG2	    0x20    /* two 4_pin UARTs */
+#define	    FPGA_SEL3_REG_SEL_UART_CONFIG3	    0x10    /* one 4_pin & two 2_pin UARTs */
+#define	    FPGA_SEL3_REG_SEL_UART_CONFIG4	    0x08    /* four 2_pin UARTs */
+#define	    FPGA_SEL3_REG_DTR_DSR_MODE_4_PIN_UART   0x00    /* DTR/DSR mode for 4_pin_UART */
+#define	    FPGA_SEL3_REG_RTS_CTS_MODE_4_PIN_UART   0x04    /* RTS/CTS mode for 4_pin_UART */
 
 /*----------------------------------------------------------------------------+
   | Soft Reset Register
   +----------------------------------------------------------------------------*/
-#define FPGA_RESET_REG              (FPGA_BASE_ADDR+0x7)
-#define     FPGA_RESET_REG_RESET_USB20_DEV          0x80    /* Hard Reset of the GT3200 */
-#define     FPGA_RESET_REG_RESET_DISPLAY            0x40    /* Hard Reset on Display Device */
-#define     FPGA_RESET_REG_STATUS_LED_0             0x08    /* 1 = Led On */
-#define     FPGA_RESET_REG_STATUS_LED_1             0x04    /* 1 = Led On */
-#define     FPGA_RESET_REG_STATUS_LED_2             0x02    /* 1 = Led On */
-#define     FPGA_RESET_REG_STATUS_LED_3             0x01    /* 1 = Led On */
+#define FPGA_RESET_REG		    (FPGA_BASE_ADDR+0x7)
+#define	    FPGA_RESET_REG_RESET_USB20_DEV	    0x80    /* Hard Reset of the GT3200 */
+#define	    FPGA_RESET_REG_RESET_DISPLAY	    0x40    /* Hard Reset on Display Device */
+#define	    FPGA_RESET_REG_STATUS_LED_0		    0x08    /* 1 = Led On */
+#define	    FPGA_RESET_REG_STATUS_LED_1		    0x04    /* 1 = Led On */
+#define	    FPGA_RESET_REG_STATUS_LED_2		    0x02    /* 1 = Led On */
+#define	    FPGA_RESET_REG_STATUS_LED_3		    0x01    /* 1 = Led On */
 
 
 /*----------------------------------------------------------------------------+
 | SDR Configuration registers
 +----------------------------------------------------------------------------*/
 /* Serial Device Strap Reg 0 */
-#define SDR0_SDSTP0                  0x0020
+#define SDR0_SDSTP0		     0x0020
 /* Serial Device Strap Reg 1 */
-#define SDR0_SDSTP1                  0x0021
+#define SDR0_SDSTP1		     0x0021
 /* Serial Device Strap Reg 2 */
-#define SDR0_SDSTP2                  SDR0_STRP2
+#define SDR0_SDSTP2		     SDR0_STRP2
 /* Serial Device Strap Reg 3 */
-#define SDR0_SDSTP3                  SDR0_STRP3
+#define SDR0_SDSTP3		     SDR0_STRP3
 
-#define sdr_pstrp0                   0x0040
+#define sdr_pstrp0		     0x0040
 
-#define   SDR0_SDSTP1_EBC_ROM_BS_MASK  0x00006000  /* EBC Boot Size Mask */
-#define   SDR0_SDSTP1_EBC_ROM_BS_32BIT 0x00004000    /* EBC 32 bits */
-#define   SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00002000    /* EBC 16 Bits */
-#define   SDR0_SDSTP1_EBC_ROM_BS_8BIT  0x00000000    /* EBC  8 Bits */
+#define	  SDR0_SDSTP1_EBC_ROM_BS_MASK  0x00006000  /* EBC Boot Size Mask */
+#define	  SDR0_SDSTP1_EBC_ROM_BS_32BIT 0x00004000    /* EBC 32 bits */
+#define	  SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00002000    /* EBC 16 Bits */
+#define	  SDR0_SDSTP1_EBC_ROM_BS_8BIT  0x00000000    /* EBC  8 Bits */
 
-#define   SDR0_SDSTP1_BOOT_SEL_MASK    0x00001800   /* Boot device Selection Mask */
-#define   SDR0_SDSTP1_BOOT_SEL_EBC     0x00000000     /* EBC */
-#define   SDR0_SDSTP1_BOOT_SEL_PCI     0x00000800     /* PCI */
-#define   SDR0_SDSTP1_BOOT_SEL_NDFC    0x00001000     /* NDFC */
+#define	  SDR0_SDSTP1_BOOT_SEL_MASK    0x00001800   /* Boot device Selection Mask */
+#define	  SDR0_SDSTP1_BOOT_SEL_EBC     0x00000000     /* EBC */
+#define	  SDR0_SDSTP1_BOOT_SEL_PCI     0x00000800     /* PCI */
+#define	  SDR0_SDSTP1_BOOT_SEL_NDFC    0x00001000     /* NDFC */
 
 /* Serial Device Enabled - Addr = 0xA8 */
 #define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5
@@ -137,8 +137,8 @@
 #define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7
 
 /* Pin Straps Reg */
-#define SDR0_PSTRP0                  0x0040
-#define SDR0_PSTRP0_BOOTSTRAP_MASK      0xE0000000  /* Strap Bits */
+#define SDR0_PSTRP0		     0x0040
+#define SDR0_PSTRP0_BOOTSTRAP_MASK	0xE0000000  /* Strap Bits */
 
 #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000  /* Default strap settings 0 */
 #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000  /* Default strap settings 1 */
@@ -153,182 +153,182 @@
 | EBC Configuration Register - EBC0_CFG
 +----------------------------------------------------------------------------*/
 /* External Bus Three-State Control */
-#define EBC0_CFG_EBTC_DRIVEN        0x80000000
+#define EBC0_CFG_EBTC_DRIVEN	    0x80000000
 /* Device-Paced Time-out Disable */
-#define EBC0_CFG_PTD_ENABLED        0x00000000
+#define EBC0_CFG_PTD_ENABLED	    0x00000000
 /* Ready Timeout Count */
-#define EBC0_CFG_RTC_MASK           0x38000000
-#define EBC0_CFG_RTC_16PERCLK       0x00000000
-#define EBC0_CFG_RTC_32PERCLK       0x08000000
-#define EBC0_CFG_RTC_64PERCLK       0x10000000
-#define EBC0_CFG_RTC_128PERCLK      0x18000000
-#define EBC0_CFG_RTC_256PERCLK      0x20000000
-#define EBC0_CFG_RTC_512PERCLK      0x28000000
-#define EBC0_CFG_RTC_1024PERCLK     0x30000000
-#define EBC0_CFG_RTC_2048PERCLK     0x38000000
+#define EBC0_CFG_RTC_MASK	    0x38000000
+#define EBC0_CFG_RTC_16PERCLK	    0x00000000
+#define EBC0_CFG_RTC_32PERCLK	    0x08000000
+#define EBC0_CFG_RTC_64PERCLK	    0x10000000
+#define EBC0_CFG_RTC_128PERCLK	    0x18000000
+#define EBC0_CFG_RTC_256PERCLK	    0x20000000
+#define EBC0_CFG_RTC_512PERCLK	    0x28000000
+#define EBC0_CFG_RTC_1024PERCLK	    0x30000000
+#define EBC0_CFG_RTC_2048PERCLK	    0x38000000
 /* External Master Priority Low */
-#define EBC0_CFG_EMPL_LOW           0x00000000
+#define EBC0_CFG_EMPL_LOW	    0x00000000
 #define EBC0_CFG_EMPL_MEDIUM_LOW    0x02000000
 #define EBC0_CFG_EMPL_MEDIUM_HIGH   0x04000000
-#define EBC0_CFG_EMPL_HIGH          0x06000000
+#define EBC0_CFG_EMPL_HIGH	    0x06000000
 /* External Master Priority High */
-#define EBC0_CFG_EMPH_LOW           0x00000000
+#define EBC0_CFG_EMPH_LOW	    0x00000000
 #define EBC0_CFG_EMPH_MEDIUM_LOW    0x00800000
 #define EBC0_CFG_EMPH_MEDIUM_HIGH   0x01000000
-#define EBC0_CFG_EMPH_HIGH          0x01800000
+#define EBC0_CFG_EMPH_HIGH	    0x01800000
 /* Chip Select Three-State Control */
-#define EBC0_CFG_CSTC_DRIVEN        0x00400000
+#define EBC0_CFG_CSTC_DRIVEN	    0x00400000
 /* Burst Prefetch */
-#define EBC0_CFG_BPF_ONEDW          0x00000000
-#define EBC0_CFG_BPF_TWODW          0x00100000
-#define EBC0_CFG_BPF_FOURDW         0x00200000
+#define EBC0_CFG_BPF_ONEDW	    0x00000000
+#define EBC0_CFG_BPF_TWODW	    0x00100000
+#define EBC0_CFG_BPF_FOURDW	    0x00200000
 /* External Master Size */
-#define EBC0_CFG_EMS_8BIT           0x00000000
+#define EBC0_CFG_EMS_8BIT	    0x00000000
 /* Power Management Enable */
-#define EBC0_CFG_PME_DISABLED       0x00000000
-#define EBC0_CFG_PME_ENABLED        0x00020000
+#define EBC0_CFG_PME_DISABLED	    0x00000000
+#define EBC0_CFG_PME_ENABLED	    0x00020000
 /* Power Management Timer */
-#define EBC0_CFG_PMT_ENCODE(n)          ((((unsigned long)(n))&0x1F)<<12)
+#define EBC0_CFG_PMT_ENCODE(n)		((((unsigned long)(n))&0x1F)<<12)
 
 /*----------------------------------------------------------------------------+
 | Peripheral Bank Configuration Register - EBC0_BnCR
 +----------------------------------------------------------------------------*/
 /* BAS - Base Address Select */
-#define EBC0_BNCR_BAS_ENCODE(n)         ((((unsigned long)(n))&0xFFF00000)<<0)
+#define EBC0_BNCR_BAS_ENCODE(n)		((((unsigned long)(n))&0xFFF00000)<<0)
 /* BS - Bank Size */
-#define EBC0_BNCR_BS_MASK       0x000E0000
-#define EBC0_BNCR_BS_1MB        0x00000000
-#define EBC0_BNCR_BS_2MB        0x00020000
-#define EBC0_BNCR_BS_4MB        0x00040000
-#define EBC0_BNCR_BS_8MB        0x00060000
-#define EBC0_BNCR_BS_16MB       0x00080000
-#define EBC0_BNCR_BS_32MB       0x000A0000
-#define EBC0_BNCR_BS_64MB       0x000C0000
-#define EBC0_BNCR_BS_128MB      0x000E0000
+#define EBC0_BNCR_BS_MASK	0x000E0000
+#define EBC0_BNCR_BS_1MB	0x00000000
+#define EBC0_BNCR_BS_2MB	0x00020000
+#define EBC0_BNCR_BS_4MB	0x00040000
+#define EBC0_BNCR_BS_8MB	0x00060000
+#define EBC0_BNCR_BS_16MB	0x00080000
+#define EBC0_BNCR_BS_32MB	0x000A0000
+#define EBC0_BNCR_BS_64MB	0x000C0000
+#define EBC0_BNCR_BS_128MB	0x000E0000
 /* BU - Bank Usage */
-#define EBC0_BNCR_BU_MASK       0x00018000
-#define EBC0_BNCR_BU_RO             0x00008000
-#define EBC0_BNCR_BU_WO             0x00010000
-#define EBC0_BNCR_BU_RW         0x00018000
+#define EBC0_BNCR_BU_MASK	0x00018000
+#define EBC0_BNCR_BU_RO		    0x00008000
+#define EBC0_BNCR_BU_WO		    0x00010000
+#define EBC0_BNCR_BU_RW		0x00018000
 /* BW - Bus Width */
-#define EBC0_BNCR_BW_MASK       0x00006000
-#define EBC0_BNCR_BW_8BIT       0x00000000
-#define EBC0_BNCR_BW_16BIT      0x00002000
-#define EBC0_BNCR_BW_32BIT      0x00004000
+#define EBC0_BNCR_BW_MASK	0x00006000
+#define EBC0_BNCR_BW_8BIT	0x00000000
+#define EBC0_BNCR_BW_16BIT	0x00002000
+#define EBC0_BNCR_BW_32BIT	0x00004000
 
 /*----------------------------------------------------------------------------+
 | Peripheral Bank Access Parameters - EBC0_BnAP
 +----------------------------------------------------------------------------*/
 /* Burst Mode Enable */
-#define EBC0_BNAP_BME_ENABLED       0x80000000
-#define EBC0_BNAP_BME_DISABLED      0x00000000
+#define EBC0_BNAP_BME_ENABLED	    0x80000000
+#define EBC0_BNAP_BME_DISABLED	    0x00000000
 /* Transfert Wait */
-#define EBC0_BNAP_TWT_ENCODE(n)     ((((unsigned long)(n))&0xFF)<<23)   /* Bits 1:8 */
+#define EBC0_BNAP_TWT_ENCODE(n)	    ((((unsigned long)(n))&0xFF)<<23)	/* Bits 1:8 */
 /* Chip Select On Timing */
-#define EBC0_BNAP_CSN_ENCODE(n)     ((((unsigned long)(n))&0x3)<<18)    /* Bits 12:13 */
+#define EBC0_BNAP_CSN_ENCODE(n)	    ((((unsigned long)(n))&0x3)<<18)	/* Bits 12:13 */
 /* Output Enable On Timing */
-#define EBC0_BNAP_OEN_ENCODE(n)     ((((unsigned long)(n))&0x3)<<16)    /* Bits 14:15 */
+#define EBC0_BNAP_OEN_ENCODE(n)	    ((((unsigned long)(n))&0x3)<<16)	/* Bits 14:15 */
 /* Write Back Enable On Timing */
-#define EBC0_BNAP_WBN_ENCODE(n)     ((((unsigned long)(n))&0x3)<<14)    /* Bits 16:17 */
+#define EBC0_BNAP_WBN_ENCODE(n)	    ((((unsigned long)(n))&0x3)<<14)	/* Bits 16:17 */
 /* Write Back Enable Off Timing */
-#define EBC0_BNAP_WBF_ENCODE(n)     ((((unsigned long)(n))&0x3)<<12)    /* Bits 18:19 */
+#define EBC0_BNAP_WBF_ENCODE(n)	    ((((unsigned long)(n))&0x3)<<12)	/* Bits 18:19 */
 /* Transfert Hold */
-#define EBC0_BNAP_TH_ENCODE(n)      ((((unsigned long)(n))&0x7)<<9)     /* Bits 20:22 */
+#define EBC0_BNAP_TH_ENCODE(n)	    ((((unsigned long)(n))&0x7)<<9)	/* Bits 20:22 */
 /* PerReady Enable */
-#define EBC0_BNAP_RE_ENABLED        0x00000100
-#define EBC0_BNAP_RE_DISABLED       0x00000000
+#define EBC0_BNAP_RE_ENABLED	    0x00000100
+#define EBC0_BNAP_RE_DISABLED	    0x00000000
 /* Sample On Ready */
-#define EBC0_BNAP_SOR_DELAYED       0x00000000
+#define EBC0_BNAP_SOR_DELAYED	    0x00000000
 #define EBC0_BNAP_SOR_NOT_DELAYED   0x00000080
 /* Byte Enable Mode */
-#define EBC0_BNAP_BEM_WRITEONLY     0x00000000
-#define EBC0_BNAP_BEM_RW            0x00000040
+#define EBC0_BNAP_BEM_WRITEONLY	    0x00000000
+#define EBC0_BNAP_BEM_RW	    0x00000040
 /* Parity Enable */
-#define EBC0_BNAP_PEN_DISABLED      0x00000000
-#define EBC0_BNAP_PEN_ENABLED       0x00000020
+#define EBC0_BNAP_PEN_DISABLED	    0x00000000
+#define EBC0_BNAP_PEN_ENABLED	    0x00000020
 
 /*----------------------------------------------------------------------------+
 | Define Boot devices
 +----------------------------------------------------------------------------*/
 /* */
-#define BOOT_FROM_SMALL_FLASH           0x00
-#define BOOT_FROM_LARGE_FLASH_OR_SRAM   0x01
-#define BOOT_FROM_NAND_FLASH0           0x02
-#define BOOT_FROM_PCI                   0x03
-#define BOOT_DEVICE_UNKNOWN             0x04
+#define BOOT_FROM_SMALL_FLASH		0x00
+#define BOOT_FROM_LARGE_FLASH_OR_SRAM	0x01
+#define BOOT_FROM_NAND_FLASH0		0x02
+#define BOOT_FROM_PCI			0x03
+#define BOOT_DEVICE_UNKNOWN		0x04
 
 
-#define  PVR_POWERPC_440EP_PASS1    0x42221850
-#define  PVR_POWERPC_440EP_PASS2    0x422218D3
+#define	 PVR_POWERPC_440EP_PASS1    0x42221850
+#define	 PVR_POWERPC_440EP_PASS2    0x422218D3
 
 #define TRUE 1
 #define FALSE 0
 
-#define GPIO_GROUP_MAX      2
-#define GPIO_MAX            32
-#define GPIO_ALT1_SEL       0x40000000      /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 0 */
-#define GPIO_ALT2_SEL       0x80000000      /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 1 */
-#define GPIO_ALT3_SEL       0xC0000000      /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 2 */
-#define GPIO_MASK           0xC0000000      /* GPIO_MASK */
-#define GPIO_IN_SEL         0x40000000      /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */
-                                            /* For the other GPIO number, you must shift */
+#define GPIO_GROUP_MAX	    2
+#define GPIO_MAX	    32
+#define GPIO_ALT1_SEL	    0x40000000	    /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 0 */
+#define GPIO_ALT2_SEL	    0x80000000	    /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 1 */
+#define GPIO_ALT3_SEL	    0xC0000000	    /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 2 */
+#define GPIO_MASK	    0xC0000000	    /* GPIO_MASK */
+#define GPIO_IN_SEL	    0x40000000	    /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */
+					    /* For the other GPIO number, you must shift */
 
-#define GPIO0           0
-#define GPIO1           1
+#define GPIO0		0
+#define GPIO1		1
 
 
-/*#define MAX_SELECTION_NB      CORE_NB */
-#define MAX_CORE_SELECT_NB      22
+/*#define MAX_SELECTION_NB	CORE_NB */
+#define MAX_CORE_SELECT_NB	22
 
 /*----------------------------------------------------------------------------+
   | PPC440EP GPIOs addresses.
   +----------------------------------------------------------------------------*/
-#define GPIO0_BASE       0xEF600B00
-#define GPIO0_REAL       0xEF600B00
+#define GPIO0_BASE	 0xEF600B00
+#define GPIO0_REAL	 0xEF600B00
 
-#define GPIO1_BASE       0xEF600C00
-#define GPIO1_REAL       0xEF600C00
+#define GPIO1_BASE	 0xEF600C00
+#define GPIO1_REAL	 0xEF600C00
 
 /* Offsets */
-#define GPIOx_OR    0x00        /* GPIO Output Register */
-#define GPIOx_TCR   0x04        /* GPIO Three-State Control Register */
-#define GPIOx_OSL   0x08        /* GPIO Output Select Register (Bits 0-31) */
-#define GPIOx_OSH   0x0C        /* GPIO Ouput Select Register (Bits 32-63) */
-#define GPIOx_TSL   0x10        /* GPIO Three-State Select Register (Bits 0-31) */
-#define GPIOx_TSH   0x14        /* GPIO Three-State Select Register  (Bits 32-63) */
-#define GPIOx_ODR   0x18        /* GPIO Open drain Register */
-#define GPIOx_IR    0x1C        /* GPIO Input Register */
-#define GPIOx_RR1   0x20        /* GPIO Receive Register 1 */
-#define GPIOx_RR2   0x24        /* GPIO Receive Register 2 */
-#define GPIOx_RR3   0x28        /* GPIO Receive Register 3 */
-#define GPIOx_IS1L  0x30        /* GPIO Input Select Register 1 (Bits 0-31) */
-#define GPIOx_IS1H  0x34        /* GPIO Input Select Register 1 (Bits 32-63) */
-#define GPIOx_IS2L  0x38        /* GPIO Input Select Register 2 (Bits 0-31) */
-#define GPIOx_IS2H  0x3C        /* GPIO Input Select Register 2 (Bits 32-63) */
-#define GPIOx_IS3L  0x40        /* GPIO Input Select Register 3 (Bits 0-31) */
-#define GPIOx_IS3H  0x44        /* GPIO Input Select Register 3 (Bits 32-63) */
+#define GPIOx_OR    0x00	/* GPIO Output Register */
+#define GPIOx_TCR   0x04	/* GPIO Three-State Control Register */
+#define GPIOx_OSL   0x08	/* GPIO Output Select Register (Bits 0-31) */
+#define GPIOx_OSH   0x0C	/* GPIO Ouput Select Register (Bits 32-63) */
+#define GPIOx_TSL   0x10	/* GPIO Three-State Select Register (Bits 0-31) */
+#define GPIOx_TSH   0x14	/* GPIO Three-State Select Register  (Bits 32-63) */
+#define GPIOx_ODR   0x18	/* GPIO Open drain Register */
+#define GPIOx_IR    0x1C	/* GPIO Input Register */
+#define GPIOx_RR1   0x20	/* GPIO Receive Register 1 */
+#define GPIOx_RR2   0x24	/* GPIO Receive Register 2 */
+#define GPIOx_RR3   0x28	/* GPIO Receive Register 3 */
+#define GPIOx_IS1L  0x30	/* GPIO Input Select Register 1 (Bits 0-31) */
+#define GPIOx_IS1H  0x34	/* GPIO Input Select Register 1 (Bits 32-63) */
+#define GPIOx_IS2L  0x38	/* GPIO Input Select Register 2 (Bits 0-31) */
+#define GPIOx_IS2H  0x3C	/* GPIO Input Select Register 2 (Bits 32-63) */
+#define GPIOx_IS3L  0x40	/* GPIO Input Select Register 3 (Bits 0-31) */
+#define GPIOx_IS3H  0x44	/* GPIO Input Select Register 3 (Bits 32-63) */
 
 /* GPIO0 */
-#define GPIO0_IS1L      (GPIO0_BASE+GPIOx_IS1L)
-#define GPIO0_IS1H      (GPIO0_BASE+GPIOx_IS1H)
-#define GPIO0_IS2L      (GPIO0_BASE+GPIOx_IS2L)
-#define GPIO0_IS2H      (GPIO0_BASE+GPIOx_IS2H)
-#define GPIO0_IS3L      (GPIO0_BASE+GPIOx_IS3L)
-#define GPIO0_IS3H      (GPIO0_BASE+GPIOx_IS3L)
+#define GPIO0_IS1L	(GPIO0_BASE+GPIOx_IS1L)
+#define GPIO0_IS1H	(GPIO0_BASE+GPIOx_IS1H)
+#define GPIO0_IS2L	(GPIO0_BASE+GPIOx_IS2L)
+#define GPIO0_IS2H	(GPIO0_BASE+GPIOx_IS2H)
+#define GPIO0_IS3L	(GPIO0_BASE+GPIOx_IS3L)
+#define GPIO0_IS3H	(GPIO0_BASE+GPIOx_IS3L)
 
 /* GPIO1 */
-#define GPIO1_IS1L      (GPIO1_BASE+GPIOx_IS1L)
-#define GPIO1_IS1H      (GPIO1_BASE+GPIOx_IS1H)
-#define GPIO1_IS2L      (GPIO1_BASE+GPIOx_IS2L)
-#define GPIO1_IS2H      (GPIO1_BASE+GPIOx_IS2H)
-#define GPIO1_IS3L      (GPIO1_BASE+GPIOx_IS3L)
-#define GPIO1_IS3H      (GPIO1_BASE+GPIOx_IS3L)
+#define GPIO1_IS1L	(GPIO1_BASE+GPIOx_IS1L)
+#define GPIO1_IS1H	(GPIO1_BASE+GPIOx_IS1H)
+#define GPIO1_IS2L	(GPIO1_BASE+GPIOx_IS2L)
+#define GPIO1_IS2H	(GPIO1_BASE+GPIOx_IS2H)
+#define GPIO1_IS3L	(GPIO1_BASE+GPIOx_IS3L)
+#define GPIO1_IS3H	(GPIO1_BASE+GPIOx_IS3L)
 
-#define GPIO_OS(x)      (x+GPIOx_OSL)    /* GPIO Output Register High or Low */
-#define GPIO_TS(x)      (x+GPIOx_TSL)    /* GPIO Three-state Control Reg High or Low */
-#define GPIO_IS1(x)     (x+GPIOx_IS1L)   /* GPIO Input register1 High or Low */
-#define GPIO_IS2(x)     (x+GPIOx_IS2L)   /* GPIO Input register2 High or Low */
-#define GPIO_IS3(x)     (x+GPIOx_IS3L)   /* GPIO Input register3 High or Low */
+#define GPIO_OS(x)	(x+GPIOx_OSL)	 /* GPIO Output Register High or Low */
+#define GPIO_TS(x)	(x+GPIOx_TSL)	 /* GPIO Three-state Control Reg High or Low */
+#define GPIO_IS1(x)	(x+GPIOx_IS1L)	 /* GPIO Input register1 High or Low */
+#define GPIO_IS2(x)	(x+GPIOx_IS2L)	 /* GPIO Input register2 High or Low */
+#define GPIO_IS3(x)	(x+GPIOx_IS3L)	 /* GPIO Input register3 High or Low */
 
 
 /*----------------------------------------------------------------------------+
@@ -337,27 +337,27 @@
 typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t;
 typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t;
 
-typedef struct { unsigned long  add;    /* gpio core base address */
+typedef struct { unsigned long	add;	/* gpio core base address */
 	gpio_driver_t  in_out; /* Driver Setting */
 	gpio_select_t  alt_nb; /* Selected Alternate */
 } gpio_param_s;
 
 /*----------------------------------------------------------------------------+
-  |                     XX     XX
+  |			XX     XX
   |
   | XXXXXX   XXX XX    XXX    XXX
-  |    XX    XX X XX    XX     XX
-  |   XX     XX X XX    XX     XX
-  |  XX      XX   XX    XX     XX
+  |    XX    XX X XX	XX     XX
+  |   XX     XX X XX	XX     XX
+  |  XX	     XX	  XX	XX     XX
   | XXXXXX   XXX  XXX  XXXX   XXXX
   +----------------------------------------------------------------------------*/
 /*----------------------------------------------------------------------------+
   | Defines
   +----------------------------------------------------------------------------*/
 typedef enum zmii_config { ZMII_CONFIGURATION_UNKNOWN,
-                           ZMII_CONFIGURATION_IS_MII,
-                           ZMII_CONFIGURATION_IS_RMII,
-                           ZMII_CONFIGURATION_IS_SMII
+			   ZMII_CONFIGURATION_IS_MII,
+			   ZMII_CONFIGURATION_IS_RMII,
+			   ZMII_CONFIGURATION_IS_SMII
 } zmii_config_t;
 
 /*----------------------------------------------------------------------------+
@@ -366,36 +366,36 @@
 typedef enum uart_config_nb { L1, L2, L3, L4 } uart_config_nb_t;
 typedef enum core_selection { CORE_NOT_SELECTED, CORE_SELECTED} core_selection_t;
 typedef enum config_list {  IIC_CORE,
-                            SCP_CORE,
-                            DMA_CHANNEL_AB,
-                            UIC_4_9,
-                            USB2_HOST,
-                            DMA_CHANNEL_CD,
-                            USB2_DEVICE,
-                            PACKET_REJ_FUNC_AVAIL,
-                            USB1_DEVICE,
-                            EBC_MASTER,
-                            NAND_FLASH,
-                            UART_CORE0,
-                            UART_CORE1,
-                            UART_CORE2,
-                            UART_CORE3,
-                            MII_SEL,
-                            RMII_SEL,
-                            SMII_SEL,
-                            PACKET_REJ_FUNC_EN,
-                            UIC_0_3,
-                            USB1_HOST,
-                            PCI_PATCH,
-                            CORE_NB
+			    SCP_CORE,
+			    DMA_CHANNEL_AB,
+			    UIC_4_9,
+			    USB2_HOST,
+			    DMA_CHANNEL_CD,
+			    USB2_DEVICE,
+			    PACKET_REJ_FUNC_AVAIL,
+			    USB1_DEVICE,
+			    EBC_MASTER,
+			    NAND_FLASH,
+			    UART_CORE0,
+			    UART_CORE1,
+			    UART_CORE2,
+			    UART_CORE3,
+			    MII_SEL,
+			    RMII_SEL,
+			    SMII_SEL,
+			    PACKET_REJ_FUNC_EN,
+			    UIC_0_3,
+			    USB1_HOST,
+			    PCI_PATCH,
+			    CORE_NB
 } core_list_t;
 
 typedef enum block3_value { B3_V1,  B3_V2,  B3_V3,  B3_V4,  B3_V5,
-                            B3_V6,  B3_V7,  B3_V8,  B3_V9,  B3_V10,
-                            B3_V11, B3_V12, B3_V13, B3_V14, B3_V15,
-                            B3_V16, B3_VALUE_UNKNOWN
+			    B3_V6,  B3_V7,  B3_V8,  B3_V9,  B3_V10,
+			    B3_V11, B3_V12, B3_V13, B3_V14, B3_V15,
+			    B3_V16, B3_VALUE_UNKNOWN
 } block3_value_t;
 
 typedef enum config_validity { CONFIG_IS_VALID,
-                               CONFIG_IS_INVALID
+			       CONFIG_IS_INVALID
 } config_validity_t;